Regal WRHB
Item #: 0-403
Optional Add-Ons
Product Details
Our Regal Humbucker is based on the early 1970s Wide Range Humbucker seen in models like the Tele Deluxe, Tele Custom, and Starcaster. It's a powerful, brighter humbucker with a distinct F-style sparkle and chime. As the "Wide Range" name suggests, its larger footprint functions as a larger lens for sensing the strings for a rich, full frequency response.
We offer both Low Wind and Standard neck versions. The Standard is a bit darker overall with a softer attack, and the Low Wind is a touch brighter with a slightly tighter low-end and less compression. True to the vintage design, we use a steel reflector plate in the bridge position to improve balance between pickup positions, though we've left it out of the neck versions for slightly quieter operation.
For Tele Custom H-S combinations, the Regal pairs well with our Special T for a classic Tele sound, or our J Street bridge for a hotter, darker tone.
Avg. DC: Neck 10.7K, Bridge 10.7K (Read about DC resistance)
Recommended Capacitor: 0.022μF
Recommended Potentiometers: 500k or 1meg
1meg pots will give you a brighter overall tone than 500k pots, but either will work. It's simply a matter of preference.
Low Wind Neck—A lower output version of our standard Regal™ neck pickup, the low wind version has a tighter low end with added sparkle on top. It's an excellent choice for pairing with lower output bridge pickups (such as our Lollar Alnico 3 Tele Bridge Pickup or Lollar '52 T Series® Bridge Pickup) or to add extra clarity and articulation to the neck position. Available in chrome, nickel, or gold covers (gold pole pieces not available).
Avg. DC: Neck 8.9K (Read about DC resistance)
Recommended Capacitor: 0.022μF
Recommended Potentiometers: 500k or 1meg
1meg pots will give you a brighter overall tone than 500k pots, but either will work. It's simply a matter of preference.
Dimensional information.
The Regal™ is the same size as Fender's Wide Range humbucker pickups. It's larger than a standard (PAF-size) humbucker and uses a different mounting pattern, so it will not fit into a standard humbucker rout and won't work with standard humbucker mounting rings.
Regarding noise from the bridge position pickup.Despite our Regal Humbucker being a humbucker, the bridge position pickup uses an inductance plate to raise the output and treble, which introduces a small amount of 60-cycle hum back into the signal. This is true to the original Wide Range design. However, we have left the inductance plate off the neck position to provide a set of pickups with a better volume balance between positions. The neck position will have a lower noise floor like other, more common humbucker designs, where the bridge will have a small amount of 60-cycle hum introduced like a single coil pickup.
Pickup Dimensions
Lollar Regal Humbucker Pickups

Nickel

Chrome

Gold

Black Chrome

Lightly-aged Nickel

Lighly-aged Chrome

Lightly-aged Gold

Uncovered Double Black

Uncovered Zebra/Uncovered Reverse Zebra
Colors shown here may vary slightly from actual colors due to differences in computer monitors.