sB Strat

Product Details:

Many players reach for the comfort, familiarity, and classic appeal of a Strat, yet are seeking different sounds without modification or routing. The Lollar sB Strat offers a unique, modern design to offer a fuller-bodied, crisp sound to fit Strat pickup cavities without the need for additional routing.

Our sB Strat set is based on the individual coils of our popular dB humbucker and is a drop-in replacement for most Strats. You'll notice stronger sustain and note bloom, with a vocal fundamental & lower midrange rather than the usual glassy, bright, and scooped sound of typical Strat pickups. They deliver a thicker sound but still retain clarity and definition like our other blade-style pickups.

They sound great as a set of three or in HSS sets along with the dB Humbucker in the bridge position. The single blade pole piece offers excellent balance between strings for an even response.

The sB Strat pickups are available as a three-piece set: neck, middle, and bridge position pickups.

Avg. DC: Neck 5.6K, Middle 6.4K, Bridge 7.2K (Read about DC resistance)
Recommended Potentiometers: 500k
Recommended Capacitor: 0.047μF

 

Frequently Asked Questions

What values of potentiometers and capacitors do you recommend for Strat pickups?
For our sB pickups, we found that 500k pots work best and offer the most top-end response, which makes them a perfect pairing with a humbucker in the bridge position. That said, there are no hard and fast rules. The most common/traditional choices for Strat-sized pickups are 250k pots (both volume and tone) and .047μF caps—and these are the values we typically still recommend for an even fatter sound from the sB Strat pickups. You can read more about how different pot and cap values affect tone in this two-part blog post: Part I - Pots, Part II - Caps.

Do you offer coil tapping for Strat pickups?
We do not offer coil tapping.

Will the blade on the sB pickups work with my guitar's fretboard radius?
Yes, the blade will offer a nice even volume balance between the strings for most fretboard shapes and sizes. The blade is also a great option for guitars with a slightly odd string spacing that doesn't match the pole spacing on original Strat-style pickups.

Will your pickups work in vintage Strats?
Our sB Strat pickups are taller than conventional Strat-sized single coils. Although we have not encountered any issues with our sB Strat pickups fitting traditional Strat sized pickup routes, we advise confirming your current pickup route depth by comparing the route against our dimensional drawing.

Do you make noiseless pickups for Strats?
Our pickups are inspired by vintage builds and voicing. With that in mind, we do not build true noiseless pickups.

Will your pickups give me that "out of phase" Strat sound in positions 2 and 4?
This is a very common misconception; the classic "quack" that you hear in positions 2 and 4 on a Strat is not a result of the pickups being out of phase. All three pickups are in-phase in our builds. The thinner quack sound comes from a drop in output that is a result of two pickups running in parallel as well as from some frequency cancellation (particularly in the low end) that is caused by the pickups being very close together.

Do you offer "matched" or RWRP pickups for Strats?
Our three-pickup Strat sets feature a middle pickup wound RWRP (reverse wind, reverse polarity) relative to the bridge and neck so that they will be hum-cancelling in positions 2 and 4 with proper phase.

How far from my strings should I set my Strat pickups?
We advise customers to start with 1/8" between their pickups and guitar strings with the strings fretted at the last fret. This is just a good starting point, but you can raise your pickups to increase volume, or lower them to decrease volume. Check out Jason Lollar's video on Adjusting Your Pickups.

Ok... so there aren't any reviews yet, but there will be soon, we promise!

Be the first to rate this item! Write a Review